Hi there.

This article is going to show you the sequence to painting your detail, specifically leaves, and edges in a landscape painting.

Many people ask questions such as…
“Should I paint over another area (overlapping), should I paint around an area I already painted, etc.

Let’s try to cover some of that here.

I will use an old master landscape for our lesson.

Here is the videos on this lesson. Turn up your sound, watch, repeat if you have to, and learn.

Part 1

Part 2 is here

Note: Museums are the best place to learn and I strongly suggest going as often as you can and looking for real examples of the lessons you learn from me.

This is an old master landscape painted by the Dutch artist “Hobbema”. A nice wooded landscape I’m sure any of you would be happy to paint, or at least know the procedure to how it was painted so you could paint your own landscape using the same or similar procedures.

Lets focus on a detail of this painting in the next image…

Look to the right of the Black Letter “A”. Do you see how those leaves overlap the sky? This is painted over, not around. Have no fear about going over the sky. It is most likely done after the sky has already dried. Painting into a wet layer, like I will explain soon, helps to get rid of that cut out look.

If you look to the left of the letter “B” and at the highlighted leaves all around the letter “C” you will see another example of detail being painted “over” not “around” an area.

The step by step process would be something like the following…Let’s use the area to the left of the letter “B”.

After the dark areas of the trees in the background were already in and dried, an intermediate glaze layer would have been applied…

Here are the steps from this point, starting with the intermediate glaze layer.

1) Use a bristle brush of the size that would fit the area you are working on.

As an example, you may want the bristles to be around the width of the letter “B” itself. This should give you a good idea of the size brush to use if you were working on this painting and the image above was life-size.

Now, take that bristle brush and dip into a darker green and thin it down with your medium. Perhaps a mixture of sap green with a little burnt umber, or perhaps raw umber with some ultramarine blue. The color mixture is not what we are focusing on here so I am generalizing about color for this example.

We are only mixing color and thinning paint, getting it to the right consistency in this step.

2) Loading this paint on your brush. The paint should not cover anything, therefore we do not need thick paint. Your goal here is to only make the canvas wet to paint into it and add a thin film of color. And not dripping wet either, just a damp film (maybe think of it as a stain) of color.

3) Apply this thin film of color over the dried area where you are going to work on the detail. This would give you a wet base to work into.

4) Make sure you have a clean brush and create a mixture for the light color of your leaves on your palette, but not your lightest, (perhaps with some sap green mixed into a light gray – again color mixture is not the focus of this lesson so I am generalizing on the color)

5) Take a clean small sable brush to apply this mixture right into your thin film of color that you have using dabs with the point of your brush. The harder you push, the larger the dab for a larger clump of leaves. Do not try to paint every individual leaf at this point.

6) When your dabs of color start to take on the color of the thin film of color you put down in step 3, it is time to load your brush with more fresh color of the mixture you made in step 4. How many dabs will this take to happen?…until you need to reload?… Perhaps 3 to 5 dabs. And when you pick up a fresh supply of paint on your brush, make sure the brush is clean first. Yes, that may mean cleaning it in turpentine before picking up the color again. Wiping it on paper towels alone may work as well.

You have to judge when you pick up and apply new color. If it is not clean, your brush was still dirty.

If you do not clean the brush between loadings of it, your dabs will blend more into the dark area that already have down. This may be effective to paint the light areas which are not the final highlights, but not for the real hard light areas where you are picking out individual leaves.

7) Lighten your mixture with more white (or lighter gray) and load your brush to pick out even lighter leaves which have even more light shining on them. This calls for a little thicker paint and a softer touch with your brush. You are laying on the paint, right over the other paint you layed down. Don’t keep teasing the dabs or they will mix with the wet paint underneath and lose their original brightness.

The thicker the paint, the lighter you need to apply paint with your brush.

If some areas are too light and you need to make them blend into the background more, you can use the sable brush without any paint on it and dry and dab into the paint you already have on the canvas, because everything is already wet, it will automatically blend into the thin film of color that you originally layed down.

Soft Edges

Note that areas are painted right over one another. Every leaf is not drawn in first and then the sky carefully filled in around it.

The edges of the trees are not drawn in first and then the sky carefully filled in around that.

And edge is a detail and can only be made soft by overlapping areas, either when the paint is dry or wet. However, putting down a wet film of paint like I described above will help keep edges soft, especially if you use the right medium. using the right medium will automatically soften edges for you.

Of course, paint what is “behind” first and paint the overlapping objects afterwards.

Details All Over

In this image below you can see I have put a red letter “D” next to some areas where there are details that are painted over other areas.

Branches, highlights on branches, highlights on leaves, leaves painted over the sky, etc.

It is the highlights on the leaves that do all the “drawing” work. They are the details and they make it seem as if every last leaf is drawn. The darker areas are masses of dark, and have no real detail in them.

But with some dabs of lighter thicker paint, these individual leaves are picked out and are great detail work.

By the way, if you want to watch this entire landscape painting being recreated from start to finish, I recommend this dvd Museum Landscapes Quick and Easy

———————————-

Related posts:

1. how to paint detail and edges in a landscape part 2
2. How to paint details and edges in a figure painting
3. How to paint a landscape

This is the second part of the video lesson.

By the way…

I recommend you get a copy of  Museum Landscapes Quick and Easy – 2 hour DVD showing how to paint a traditional landscape (the very one in this demo) using the wet on wet method. This goes beyond the wet on wet method you have seen on tv.

Related posts:

1. how to paint detail and edges in a landscape
2. How to paint a landscape
3. How to paint details and edges in a figure painting